FF

ON MODE

3

O

 

1

 

 

1, 2

CAMERA

VCR

CARD

P.B

12:30:4512:30:45

15.10.200215.10.2002

21

1

1

OPEN

2 2180x 390x

LCD/EVF SET

LCD BRIGHTNESS [-]----[+]

LCD COLOUR LEVEL [-]----[+]

EVF BRIGHTNESS [-]----[+]

PRESS MENU TO RETURN

Turning on the Movie Camera and Selecting Modes

Turn on the power first and then select modes.

ªHowto Turn on the Power1Rotate the[OFF/ON/MODE]Switch to [ON] whilepressing thecentre button 1.

≥The [CAMERA] Lamp lights up.

ªHowto Switch Modes2Rotate the[OFF/ON/MODE]Switch.

≥With each rotate, the Mode changes. ≥The appropriate Mode Lamp lights up.

ªHowto Turn off the Power3Rotate the[OFF/ON/MODE]Switch to [OFF] while pressing thecentre button 1.

~~~~~~~~~~~~~~~~~~~~~~~~~

Using the Viewfinder/LCD Monitor

ªUsing the Viewfinder

Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.

1PulltheViewfinder.2Adjust byturning theEyepiece Corrector Knob 1.ªUsing the LCD Monitor

With the LCD Monitor open, you can also record the picture while watching it.

1Bringthe LCD Monitor out about 90ointhedirection of the arrow.

≥The Viewfinder goes off.

2Adjust theLCD Monitor angle accordingto thedesiredrecordingangle.

≥The LCD Monitor can rotate a maximum of 180o 2 from the vertical position to the upward direction and a maximum of 90o 3 to the

downward direction. Forcefully rotating the LCD Monitor beyond these

ranges will damage the Movie Camera.

Closing the LCD Monitor

Push the LCD Monitor until it is securely locked.

ªAdjusting Brightness and Colour Level

When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-Menu is set to [YES], the following items are displayed. (l12)

LCD Brightness [LCD BRIGHTNESS]

It adjusts the brightness of the image on the LCD screen.

LCD Colour Level [LCDCOLOURLEVEL]

It adjusts the colour saturation of the image on the LCD screen.

Brightness of the Viewfinder [EVFBRIGHTNESS]

It adjusts the brightness of the image in the Viewfinder.

To Adjust

Press the [PUSH] Dial and select the item to be adjusted, and then turn the [PUSH] Dial to raise or lower the number of vertical bars in the Bar Indication. ≥A larger number of vertical bars indicates stronger brightness or colour

saturation.

Increasing the Brightness ofthe Entire LCD Monitor

Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT]. ≥These adjustments do not affect the recorded images.

≥For other notes concerning this item, see page 50.

11