By changing [C.DISPLAY] on the [DISPLAY SETUP]
To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the [DISPLAY SETUP]
You can also press the [DATE/TIME] Button of the Remote Controller repeatedly to display or change the Date/Time Indication.
ªTo Change the Display ModeBy changing [DISPLAY] on the [DISPLAY SETUP]
~~~~~~~~~~~~~~~~~~~
Owner ID
You can register your name and address in your Movie Camera to identify the owner.
1Set [CAMERA FUNCTIONS] >>[OTHER FUNCTIONS] >> [OWNER ID SET]>> [YES].≥The [OWNER ID] Menu appears.
2Turnthe[PUSH] Dialto select [PINNUMBER] and pressthe [PUSH]Dial toinput desired numbers.
3Turnthe[PUSH] Dialto select numbersand pressthe [PUSH]Dial toenter them.≥You can input 4 digits.
4Push theOperation Lever towards [∫].5≥You can input up to 12 characters in [NAME], and up to 11 characters in [POSTCODE].
6PushtheOperationLevertowards[∫]tofinish thesetup.To verify Owner ID≥Keep pushing the Operation Lever towards [;] for approximately 5 seconds.
To Check Owner IDIf Owner ID has already been set, carrying out Step 1 above will display [INPUT PIN NUMBER] on the screen. Input the Pin Number you have already selected. If the number is not correct, the screen will not change. If the number is correct, the contents of the setup will be displayed. (By repeating Steps 2 to 4 above, you can change the contents.)
~~~~~~~~~~~~~~~~~~~
Warning/Alarm Indications
If any one of the following indications lights up or flashes, please check the condition of the Movie Camera.
≥Some Indications may not be displayed according to the model.
3: | Condensation has occurred. (l49) |
Y: | The accidental erasure prevention |
| slider on the inserted Cassette is |
| open (that is, set to [SAVE]). |
| You are about to do audio dubbing |
| on the unrecorded (blank) portion of |
| the tape. |
| No Cassette is inserted. (l10) |
6: | The Battery is low. Recharge it. |
| (l9) |
0: | The |
:: | The video heads are dirty. (l49) |
2END: | The tape came to end during |
| recording. |
REMOTE: | Wrong Remote Controller Mode has |
| been selected. (l8) |
PRINTER ERROR: | The Video Printer is not connected |
| correctly, or the Video Printer is not |
| functioning properly. |
UNPLAYABLE TAPE |
|
(OTHER FORMAT): | You are attempting to play back a |
| tape section that has been recorded |
| with a different TV system. |
UNABLE TO A. DUB |
|
(LP RECORDED): | Because the original recording was |
| done in LP Mode, audio dubbing |
| cannot be performed. |
INCOMPATIBLE |
|
TAPE: | This Cassette is incompatible. |
PLEASE | |
AFTER PUSHING |
|
RESET BUTTON: | Mechanism Irregular is detected. |
| Press the [RESET] Button (l6). |
| This may solve the problem. |
| You are attempting to record to a |
| Memory Card formatted with an |
| other equipment (like a Personal |
| Computer). Format the Memory |
| Card with this equipment. |
TO SERVICE: | It is a malfunction. |
CARD FULL: | Card does not have sufficient |
| memory remaining. |
| Select Card Mode and delete |
| unnecessary files. |
NO CARD: | Card is not inserted. |
NO FILE: | Card has no files recorded on it. |
CARD ERROR: | This Card is not compatible with this |
| Movie Camera. |
COPY INHIBITED: | Because the medium is protected by |
| a copy guard, images cannot be |
| recorded correctly. |
INCORRECT |
|
OPERATION: | You are attempting to record to a |
| tape in VCR Mode. |
In
You are attempting to record to a tape in Card Mode.
~~~~~~~~~~~~~~~~~~~
Notes and Hints
ªConcerning the Power Supply≥When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not a malfunction.
≥If the [CHARGE] Lamp does not light up although the Battery is attached to AC Adaptor, detach the Battery and reattach it.
≥Battery
43