≥With this mode, recorded images may turn out to be extremely dark.
≥If the recording subject is extremely bright, its recorded image may turn out to be whitish.
Surf & Snow Mode≥If the recording subject is extremely bright, its recorded image may turn out to be whitish.
ªWhite BalanceIn the following cases, you cannot change White Balance:≥When you set [EFFECT1] of [DIGITAL EFFECT]
≥When you set the Zoom to 10k or higher
≥During Digital Still Picture Mode ≥When you display a Menu
≥When you use the Colour Night View
In the following cases, the [1] Indication flashes:≥The flashing indicates that the previously adjusted White Balance setting is still kept. This setting will be kept until White Balance is adjusted again.
≥You may not be able to achieve correct White Balance Adjustment manually under weak illumination.
ªManual Shutter Speed Adjustment≥You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject.
≥During normal playback, movement in the images may not look smooth.
≥Because the colour and brightness of the playback image may become unstable, avoid recording under fluorescent light, mercury light or sodium light.
≥If you are using either
≥Depending on zoom magnification, there are iris values that will not be displayed.
≥If you are using Programme AE Mode (l21), you cannot adjust the iris. If the iris is adjusted manually, this setting will be cancelled.
≥If you attempt to adjust the Shutter Speed after setting the Iris, the value set for the Iris will be cancelled.
ªDigital EffectFunctions≥It is not possible to use [MULTI],
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible. (l21) ≥When [PROGRESSIVE] on the [CAMERA SETUP]
≥Card Mode
Itis as follows when [GAINUP] isselected.≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated. ≥The Sports Mode [5], the Portrait Mode [7] and Low
Light Mode [4] are cancelled.
If either one of the following operations is carried out, stored images will be erased, and Wipe and Mix Functions cannot be used.
≥Use the Camera Search Function ≥Press the [STILL] Button
≥If the Movie Camera is turned off, the smaller picture disappears.
≥Titles cannot be inserted into the smaller picture.
≥If the [MULTI] Button is pressed while
mode.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be cut off slightly.
ªPlaying BackRepeat PlaybackIf you continue to press the [1] Button for 5 seconds or longer, the Movie Camera switches to Repeat Playback Mode, and the [R !] Indication appears. (To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Listening to PlaybackSound throughHeadphonesIf you want to use the headphones to listen to the playback sound, set [AV JACK] on the [AV IN/OUT SETUP]
You can select the sound by using the [AUDIO OUT] setting on the [PLAYBACK FUNCTIONS]
L:Left channel sound (main sound)
R:Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the [AUDIO REC] on the [RECORDING SETUP]
≥Index Search may not be possible at the beginning of tape. ≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the Photoshot Index Search Function cannot be used for these still pictures.
≥Scene Index Search may not function properly if the interval between 2 scene index signals is shorter than 1 minute.
ªPlayback Zoom Function≥You cannot adjust the sound volume with the Remote Controller in Playback Zoom Mode.
≥If you turn off the Movie Camera power or if you switch from VCR Mode to Camera Mode, Playback Zoom Mode is automatically cancelled.
≥Even if Playback Zoom Functions are being used, images that are output from the DV Terminal (l6) or Digital Still Picture Terminal (l32) are not enlarged.
≥As you enlarge an image, the quality of image suffers. ≥During a Playback Zoom, the Variable Speed Search
Function cannot be changed with the Remote Controller.
45