Storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels (NV-HV60GL/Australia)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
That is, if you can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary.
Preparations
•Confirm that the TV is on and the VCR viewing channel is selected.
•Turn on the VCR and select any programme position except A1 or A2.
•Set [VCR/TV] switch (22) to [VCR].
tuned on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local TV broadcast channels to any desired programme position.
Plug in Auto Tuning
(NV-HV60GN/New Zealand)
When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts.
Operations
1Press [MENU] (7) to display the Main menu on the TV screen.
2Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23).
MENU
CLOCK SET TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
MENU
CLOCK SET 
TUNER PRESET SYSTEM OPTION
SELECT :
, OK
END :MENU
AUTO TUNING |
| AUTO TUNING IS |
IN PROGRESS, |
| COMPLETED. |
PLEASE WAIT. |
|
|
CH 22 SEARCH | 21 | END: MENU |
END: MENU
During Plug in Auto Tuning | After Plug in Auto Tuning |
Auto tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position.
•If you turn the VCR off during Auto Tuning, Auto Tuning will stop halfway.
•If the VCR starts playback during Auto Tuning, Auto Tuning will stop halfway.
3Press [Cursor] (37) (34) to select [AUTO TUNE] then press [Cursor] (37) (21) to start the
Auto Tuning.
•When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected.
TUNER PRESET |
| |||||
CH 1 |
|
|
|
|
|
|
CLEAR |
|
|
|
|
| [OFF] |
AUTO TUNE |
| |||||
SEARCH |
|
|
|
|
| [3] |
FINE |
|
|
|
|
|
|
SELECT: |
|
|
|
| END :MENU | |
|
|
| ||||
| AUTO TUNING |
| ||||
| IN PROGRESS, |
| ||||
| PLEASE WAIT. |
| ||||
CH 1 |
| SEARCH | 100 | |||
|
|
|
|
| END: MENU | |
To Cancel Auto Tuning
Press [MENU] (7) during Auto Tuning. Auto Tuning is cancelled.
To Restart Plug in Auto Tuning:
1Press [EJECT] (40) and remove the video cassette.
2Keep both [Channel] (32) I and Jon the VCR pressed simultaneously for 3 seconds or more during the VCR on.
•The channel displayed on the VCR display disappears for a moment then changes to 1.
Disappears 
1
3Disconnect the mains lead and then reconnect it.
4Turn off the VCR and then turn it on.
• Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off or a power failure:
1Disconnect the mains lead and then reconnect it.
2Turn off the VCR and then turn it on.
• Auto Tuning commences.
The number displayed here is the number of channels still to be auto tuned.
Channels that can be Received
| VHF | UHF | CATV |
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
•Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position. Other programme positions are skipped.
•Auto Tuning takes five or more minutes to complete its search.
•If the VCR is not correctly tuned by Auto Tuning, follow the procedure on page 8.
7
