LSQT0879.book 11 ページ ２００５年１月２６日 水曜日 午後６時１７分
To Select the Recording Duration and Perform Timer Recording (OTR Recording)
OTR means
After the selected recording duration has elapsed, recording stops and the VCR automatically switches off.
To Perform an OTR Recording:
1Display the VCR picture on the TV.
2Insert a video cassette with an intact erasure prevention tab.
3Press [CH] (20) to select the programme position on which the TV programme to be recorded will be broadcast.
4Press [REC/OTR] (37) to start recording.
5Press [REC/OTR] (37) repeatedly to select the desired recording duration.
•Every time you press this button, the recording duration indicated in the VCR display changes in the following order.
•For example, if you select [30], the VCR records a programme for 30 minutes.
Counter display (normal recording mode) # 30 (min.) # 60 (min.) # 90 (min.) # 120 (min.) # 180 (min.) #
240 (min.) # Counter display (normal recording mode)
To Stop the OTR Recording Before the End:
Press [STOP] (12).
Notes:
•The OTR function works during normal recording.
•When the tape reaches its end during OTR recording, the VCR will turn itself off.
Recording from an external source
This function can be used to make up an edited tape from other recordings or video sources.
A new scene can be added to the end of previous one.
Operations
1Press [PLAY] (8) to start playback.
2At the point where you want to join a new scene, press [PAUSE/SLOW] (29) to put it in the still playback mode.
3Press [REC] (15) to put it in the recording pause mode.
4Start playback on the source unit and search for the point from which you want to record (copy) onto this VCR.
5When that point is reached, press [PAUSE/SLOW] (29) again to start recording the new picture and sound from the playback unit.
6To record (copy) additional scenes, press [PAUSE/ SLOW] (29) to put this VCR in the recording pause mode and then perform above steps 4 and 5 again.
7At the point where you want to stop recording, press [STOP] (12) to finish recording.
Note:
•If you leave the VCR in the recording pause mode for more than 5 minutes in step 3 or 6, the VCR automatically switches over to stop mode to protect the video heads.
To Delete all of a Cassette’s Contents (Tape Refresh Function)
You can delete a cassette contents (the picture, the sound and the Jet Navigator data) all at once.
Operations
1Be sure to set [JET NAVIGATOR] to [ON] when you want to delete all contents of a cassette that is recorded while setting [JET NAVIGATOR] to [ON]. Be sure to set [JET NAVIGATOR] to [OFF] when you want to delete all contents of a cassette that is recorded while setting [JET NAVIGATOR] to [OFF] or is recorded on another VCR. (See page 8.)
2Insert a cassette that you want to delete the cassette contents.
3Press [MENU] (9) to display the Main menu on the screen.
Recording VCR
(1)
AC IN ～
VIDEO 
AUDIO 
IN(AV1) OUT
(2)
(1) VIDEO IN (40)/AUDIO IN (43) | (2) Other VCR or Video movie |
| camera |
Preparations
4Press [43] (28) to select the [TAPE REFRESH], and then press the [ENTER] (26).
5Press [ENTER] (26) for 2 seconds or more to start the tape refresh function.
•When the tape refresh function is working, the remaining tape time
appears on the VCR | REMAIN |
display. | SP |
T A P E R E F R E S H
S T A R T : E N T E R
E N D : S T O P
T A P E R E F R E S H
E N D : S T O P
•Connect a video movie camera or another VCR to this VCR as shown.
•Display the VCR picture on the TV.
•Insert the cassette on which the copying is to be performed, and make sure that its erasure prevention tab is not broken out.
•Select the audio/video source required by pressing [INPUT SEL] (6) to set AV.
The tape is rewound to the beginning, and it is
When the tape reaches the end, the VCR automatically rewinds it to the beginning.
Note:
•When a video cassette with a broken off erasure prevention tab is inserted, this function is not activated.
11
LSQT0879
