LSQT0879.book 15 ページ ２００５年２月８日 火曜日 午後５時２８分
Confirming the cassette which includes a programme you want to watch
(Jet Navigator Memory)
This allows you to search the cassette which you recorded the programme you want to watch without inserting video cassette tapes.
Preparations
•Display the VCR picture on the TV.
•You can only search for cassettes recorded in timer recording with setting [JET NAVIGATOR] to [ON] (See page 8) on this VCR in the past.
1 Press [MENU] (9) to display the Main menu on the TV screen.
2 Press [43] (28) to select [NAVI MEMORY 1*PROG.] then press [ENTER] (26).
• NAVI MEMORY Screen appears.
• The programme list for 1 cassette 10/18 1 10:30 MUSIC is displayed per 1 screen.
•Up to 20 cassettes can be selected on this VCR and
displayed on the NAVI MEMORY | SELECT : |
|
| END : MENU |
|
|
|
| |
Screen. |
|
|
|
|
*The number of Jet Navigator Data memorized on this VCR is displayed.
3Press [2 1] (28).
•The display can be switched for each cassette (programme list).
To Cancel the NAVI MEMORY Screen:
Press [MENU] (9).
To Demonstrate the Jet Navigator Function
Keep [NAVI] (25) pressed for more |
|
|
| |
NO.01 | JET | NAVIGATOR | ||
than 5 seconds without inserting a | DATE | CH | ON | CATEGORY |
1/10 | 2 | 8:00 | MUSIC | |
cassette tape. | 1/10 | 6 | 19:00 | SPORT |
1/10 | 4 | 21:00 | MOVIE | |
| 1/10 | 6 | 22:00 | CHILD |
| DEMONSTRATION | |||
|
|
| ||
| SELECT : NAVI | END : MENU | ||
To Cancel the Demonstration of Jet Navigator Function:
Press [MENU] (9).
To Check the Recorded Programming Data (Time Stamp Function)
When playback starts after searching
CH 2 10/29. SA ON 20:02
with Jet Navigator function or index search function, recorded programming data (called Time Stamp) appears on the TV screen for approx. 5 seconds.
Note:
• Time Stamp does not appear if the beginning of the Jet |
Index signals are automatically recorded in the following cases:
•When you start a recording by pressing [REC] (15) or [REC/ OTR] (37).
•When a timer recording starts.
•When you press [REC] (15) on the remote control during recording.
Conditions for correct operation of the Index search function:
•The VCR must be in the stop mode or in the playback mode.
•Each programme recorded on the tape must be at least 5 minutes long.
Preparations
•Display the VCR picture on the TV.
•Insert a recorded video cassette.
Operation
1Press [INDEX] (13) (that corresponds to the direction from the current tape position in which the desired programme is located on the tape) to start the index search.
For example, if you want to search for the 2nd
recorded programme in forward direction, press [INDEX] (13) (L) twice.
SP
•The VCR
When it is found, playback starts automatically.
To Cancel the Index Search or to Stop Playback:
Press [STOP] (12).
Notes:
•Searching in either direction is possible up to the 20th index signal.
•If you press either of [INDEX] (13) too many times, simply press the other [INDEX] (13) (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.
•The figure on the VCR display decreases by 1 every time an index signal is located.
Finding a
Allows you to find a
Preparation
Set timer recording for the programme you wish to view.
Navigator data is not recorded 10 minutes before and after |
the current tape position even when index signals are |
recorded. |
To Find the Beginning of Each Recording (VHS Index Search System)
Operation
1 Press [PROG PLAY] (21).
• As soon as the
PROG PLAY 
2222 
This VCR automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired programme quickly and easily.
To Cancel the Easy Programme Playback:
Press [STOP] (12).
Notes:
•The VCR memorises the position at which timer recording is set to the standby mode by pressing [TIMER (REC)] (14) as the start point of Easy Programme Playback.
•If you take out the cassette after a timer recording has finished, Easy Programme Playback function does not work.
15
LSQT0879
