LSQT0879.book 8 ページ ２００５年１月２６日 水曜日 午後６時１７分
Option Setting
MENU |
|
|
|
| OPTION |
| |||||
CLOCK SET |
| TAPE SELECT | [AUTO] | ||||||||
TUNER PRESET |
| NTSC INPUT SELECT [AUTO] | |||||||||
SYSTEM |
| NTSC PB SELECT | [onPALTV] | ||||||||
OPTION |
| JET NAVIGATOR | [OFF] | ||||||||
TAPE REFRESH |
| DELETE NAVIDATA | [NO] | ||||||||
NAVI MEMORY 0PROG. |
| OSD REC | [OFF] | ||||||||
|
|
|
|
| OSD | [AUTO] | |||||
SELECT : |
|
| , ENTER |
| SELECT: |
|
|
|
|
| END :MENU |
END :MENU |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
1Press [MENU] (9) to display the Main menu on the TV screen.
2Press [43] (28) to select [OPTION] then press [ENTER] (26).
3Press [43] (28) to select the desired field.
TAPE SELECT: | To select the corresponding video |
| cassette tape length to display the |
| approximate remaining tape time. |
•Press [2 1] (28) to select the corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30,
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
•The remaining tape time may not be displayed correctly depending on the tape used.
NTSC INPUT SELECT:To select the colour TV system used to record NTSC signals.
•Press [2 1] (28) to select [AUTO]. Allows NTSC [4.43] or [3.58] signals to be distinguished automatically.
•If the tape has not recorded correctly, select 4.43 or 3.58. 4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
•Some programmes on NTSC 3.58 system cannot be recorded correctly by selecting [3.58].
NTSC PB SELECT: To select the colour TV system of the TV used to play back a tape recording NTSC signals.
•Press [2 1] (28) to select the desired position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR: | To set the conditions for the Jet | |
|
| Navigator Function. |
• Press [2 1] (28) to select [ON] or [OFF]. | ||
OFF: | Initially set at this position. | |
ON: | Jet Navigator function works. If you select [ON], | |
| [OSD REC] is set to [OFF] automatically. | |
|
| |
DELETE NAVIDATA: | To delete all the Jet Navigator data | |
|
| stored in the VCR memory. |
•Press [2 1] (28) to select [ENTER] then press [ENTER] (26) to do the deletion.
NO: Initially set at this position.
ENTER: It is done to delete all the Jet Navigator data.
8
OSD REC: | To set the conditions for the OSD | |
|
| Recording function. |
• Press [2 1] (28) to select [ON] or [OFF]. | ||
OFF: | Initially set at this position. | |
ON: | This setting enables OSD Recording. (See page | |
| 10.) If you select [ON], [JET NAVIGATOR] is set | |
| to [OFF] automatically. | |
|
|
|
OSD: |
| To select the On Screen Display |
|
| mode. |
• Press [2 1] (28) to select [AUTO] or [OFF].
AUTO: To make various indicators appear On Screen Display for 5 seconds press [STATUS/ NAVI CHECK] (32).
OFF: No indications appear.
4 Press [MENU] (9) twice to exit the On Screen Display.
LSQT0879
