Running Eclipse FAX SE from the HP OfficeJet LX Manager

There may be times when you want to run Eclipse FAX SE directly from the HP OfficeJet LX Manager. To do so, from the HP OfficeJet LX Manager menu bar, choose File/Run Eclipse FAX SE.

For information about using Eclipse FAX SE, see chapter 4.

Reviewing the Device Settings

The table below shows the device settings that you can change with the HP OfficeJet LX Manager. It also gives the factory settings (defaults), where applicable. Each option is explained in the following pages.

Setting

Use Whenever You Need To ...

Applies To ...

 

Send Fax Setup

Change the Fax Header (current date and time, name, and

All settings apply to both

 

 

number) that is printed at the top of all faxed pages.

paper and PC faxes. For PC

 

 

Specify tone or pulse. The factory setting is Dialing Mode=Tone.

faxes, Automatic Redial is

LX

 

Specify whether faxes that fail the first time should be re-dialed.

managed from the PC.

 

The factory setting is Automatic Redial=On.

 

OfficeJet Manager

Speed Dial Setup

Add, change, or delete the names and fax numbers of people to

Speed Dials apply only to

 

 

whom you frequently send faxes.

paper faxes.

 

 

Add, change, or delete a speed dial group, which lets you send a

 

 

 

fax to multiple recipients.

 

2.

 

Print a report of your speed dial entries.

 

 

 

 

Scanned Image

Change the contrast (light, normal, or dark) for copies and

The Contrast and

 

Quality

:outgoing faxes. The factory setting is Contrast=Normal.

Resolution settings apply

 

 

Change the resolution (standard, fine, or photo) for outgoing faxes.

only to paper faxes and

 

 

The factory setting is Resolution=Standard.

copies. (Eclipse FAX SE

 

 

 

has its own Resolution

 

 

 

setting, which may or may

 

 

 

not be the same as the HP

 

 

 

OfficeJet LX Manager

 

 

 

setting.)

 

2`7

Page 32
Image 32
HP manual Running Eclipse FAX SE from the HP OfficeJet LX Manager, Reviewing the Device Settings