Understanding the Displayed Messages

The following control panel messages are listed alphabetically for easy reference.

This message:

 

Has this meaning:

 

And requires this action:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

nn pages sent

 

The fax you just sent may contain poor

 

Contact the receiver and verify quality,

Poor Quality

 

print quality resulting from problems

 

or resend the fax.

 

 

 

 

 

with the phone line.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Add paper

 

You are printing and the paper tray is

 

Load paper for your print job, then

then press START

 

empty.

 

press the Start/Copy button.

 

 

 

 

 

 

 

 

 

 

If paper is already loaded in the paper

 

 

 

 

 

 

 

 

 

 

tray when you get this message, remove

 

 

 

 

 

 

 

 

 

 

it. (Also check for any partially-loaded

 

 

 

 

 

 

 

 

 

 

sheets and remove them, too.) Discard

 

 

 

 

 

 

 

 

 

 

any damaged or curled sheets from the

 

 

 

 

 

 

 

 

 

 

stack, then reload the stack and press

 

 

 

 

 

 

 

 

 

 

Start/Copy.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cancel pending fax?

 

You pressed Stop while the HP

 

Press 1 to cancel the memory-stored

1=Yes 2=No

 

OfficeJet LX was waiting to redial and

 

fax. Press 2 to continue redialing the

 

 

 

 

 

send a memory-stored fax.

 

memory-stored fax.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clear print jam

 

A piece of paper has jammed inside the

 

Remove the output tray and pull out all

then press START

 

printer mechanism.

 

wrinkled or torn pieces of paper from

 

 

 

 

 

 

 

 

 

 

the paper path. Also remove wrinkled

 

 

 

 

 

 

 

 

 

 

or torn pieces of paper from the paper

 

 

 

 

 

 

 

 

 

 

tray. When finished, replace the output

 

 

 

 

 

 

 

 

 

 

tray and press the Start/Copy button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OJ-6

OJ-57

(Continued on next page)

7`8

Page 177
Image 177
HP LX manual Understanding the Displayed Messages