HP LX manual Eclipse Fax SE

Eclipse Fax SE	You may have previously installed a CAS fax	Remove (delete) the software for the other
doesn't work on	modem that was not removed before Eclipse	CAS modem.
the PC.	Fax SE was installed. Only one CAS modem
	can be used on a PC.
Nothing happens	If the HP OfficeJet LX printer doesn't	Run the Windows control panel, select
when I try to	respond when you try to print, it may be set	Printers, select the HP OfficeJet LX, then
print.	to the wrong port.	click the Connect button. Select the port that
		is connected to your device. Do not select HP
		OfficeJet LX. Click OK, close Printers and
		the control panel, and try printing again.
You get the	The HP OfficeJet LX printer cannot access	If you are using a data switch to run two
message, "LPT1	LPT1.	printers from a single LPT port, be sure that
is in use."		all HP OfficeJet LX activities are complete,
		and the HP OfficeJet LX Manager and
		Eclipse FAX SE are closed before switching
		to another printer.

Troubleshooting

You get the message, "Printer not responding."

Your HP OfficeJet LX is turned off or disconnected.

Turn your HP OfficeJet LX on by pressing the "I" on the On/Off switch located on the left side of the machine's base. Make sure that the interface cable is connected. (See "Connect the Interface Cable for Printing" in chapter 1). Click Reconnect. If your HP OfficeJet LX was previously able to connect to the device, check that the cable is securely connected at both ends; the device is turned on and "Ready" is displayed on the front panel. Check that any data switch in use is set to connect to the HP OfficeJet LX. Then click Reconnect.

7.

Nothing happens when I try to print.

If the HP OfficeJet LX printer doesn't respond when you try to print, it may be set to the wrong port.

Run the Windows control panel, select Printers, select the HP OfficeJet LX, then click the Connect button. Select the port that is connected to your device. Do not select HP OfficeJet LX. Click OK, close Printers and the control panel, and try printing again. If you still cannot connect:

close the HP OfficeJet LX Manager exit Windows

turn the machine off, then back on restart Windows

restart the HP OfficeJet LX Manager

If your HP OfficeJet LX has never connected to the device, you may be using a cable, data switch, or centronics port that does not support bi-directional communications.

The printer	Once you start a print job, the document is
prints part of a	sent to the printer. If you cancel the print job,
canceled print	while the printer is out of paper, or otherwise
job.	disabled, the portion of the document that
	was sent prints when the printer is available.

(Continued on next page)

To prevent portions of canceled prints jobs from printing press Load/Eject on the front panel while the message "Printing/Waiting for data..." is displayed.

7`24