Do this:
8.Enter the fax number OR press Speed Dial and a
Using |
|
these buttons: | For this display: |
0 | through | 9 | Enter fax number |
|
|
| 5554138 |
9. Press Enter/Save to save the fax number you | Enter/Save |
|
entered. |
|
|
|
|
|
Store fax now? 1=Yes 2=No
10.Press 1 to store the document in memory until the fax start time, or press 2 to load the document in the fax loading tray until the fax start time.
1 |
OR
Load document, then press START
OR
| 2 |
| |
11. If you pressed 1 in the previous step, load the |
|
|
|
Start/Copy | |||
document and press Start/Copy to begin storing it |
|
|
|
in memory. (If the memory isn't large enough to |
|
|
|
store your document, a "Memory full" message |
|
|
|
|
|
| |
is displayed; you'll need to leave the entire |
|
|
|
document in the fax loading tray until the start |
|
|
|
time.) |
|
|
|
OR
If you pressed 2 in the previous step, load the doc` ument and leave it there until the fax start time. You can remove the document if you need to send another fax or make copies, then replace it before the start time; the bottom line of the display re` minds you of the start time you set.
Load document, in fax tray
Storing . . .
Memory used: xx%
OR
Document loaded Fax at 1:00 AM
Note that you can continue to use the HP OfficeJet LX as you normally would, even while a scheduled fax is pending. If you want to cancel a scheduled fax: Repeat steps
1 through 5 on the previous page, then press Right Arrow to display "Cancel Send," then press Enter/Save to cancel the scheduled fax.
Note: You can also send a fax at a future time by using the Scan and Fax fetaure of Eclipse FAX SE. This will store the fax on your PC until the scheduled send time, instead of storing it in the device. You can also use Scan and Fax to schedule more than one fax for future transmission.
3`10
