Controlling How Your Copies Will Look
The following sections describe how to assess the quality of your original document and how to make adjustments that will improve the appearance of your copies.
Use the following table to decide if you need to modify your original or the copier settings before copying.
Goal:
Graphic illustrations and photographs as sharp as possible
Lighten or darken the copy while scanning
Copy a document that's smaller than standard sizes or a document that's torn
Copy a document that's stapled or
Do this:
Adjust the Resolution setting to Photo.
Adjust the Fax/Copy Contrast setting.
Insert the original document into a protective document carrier before copying. (A document carrier is a clear plastic holder that looks something like a page protector. It's available at most office supply stores.)
Remove staples and paper clips from the document before copying.
CAUTION: Failure to remove staples and paper clips before copying can cause permanent damage to the scanner inside the HP OfficeJet LX.
5`14