HP LX Preparing to Send a Fax Send Setup, Resolution, Best Available resolution is 204 x 196 dpi

Models: LX

1 223
Download 223 pages 21.29 Kb
Page 74
Image 74

Preparing to Send a Fax (Send Setup)

Before sending faxes from your PC, either from Windows or directly from Eclipse FAX SE, you may want to use Send Setup to change the Resolution or to modify the Cover Page Information that was entered during installation. Send Setup has one other setting, New Page Paper Size. For information about this setting, see "Setting the New Page Paper Size." You don't need to use Send Setup unless you want to change one or more of these settings.

To use Send Setup, follow these steps.

1.Open Eclipse FAX SE. (Remember that the HP OfficeJet LX Manager must be running.)

2.Choose Send/Setup from the menu bar. The Send Fax Setup dialog box appears.

3.Optionally, change the

Resolution.

:Standard resolution (the default) is 204 x 98 dpi.

:Best Available resolution is 204 x 196 dpi.

Note: For faxes sent from your PC only, the resolution that you choose here will override the setting made with the HP OfficeJet LX Manager or the control panel. It will not affect the resolution of paper faxes.

4.Optionally, in the Cover Page Information box, change any of the entries that were made during installation.

5.When you have completed this dialog box, click the OK button. Click the Cancel button at any time to close the dialog box without saving your changes; click the Help button to access the online help.

4`6

Page 74
Image 74
HP LX manual Preparing to Send a Fax Send Setup, Resolution, Best Available resolution is 204 x 196 dpi