LSQT0879.book 6 ページ ２００５年１月２６日 水曜日 午後６時１７分
Manual Tuning Procedure
If the VCR is not correctly tuned by Auto Tuning, follow the procedure below.
1Press [MENU] (9) to display the Main menu on the TV screen.
2Press [43] (28) to select [TUNER PRESET] then press [ENTER] (26).
3Press [43] (28) to select [CH] then select the channel number you want to tune by pressing [2 1] (28).
4Confirm that [CLEAR] is set to [OFF].
5Press [43] (28) to select [SEARCH] then press [2 1] (28) to start the Manual Tuning.
|
| CH 2 | SEARCH 74 | ||
|
| ||||
CH 2 | SEARCH |
|
|
| END: MENU |
| END: MENU |
|
|
|
|
•If the desired TV station has not been tuned, press [2 1] (28) again.
•Press [MENU] (9) and repeat steps
6Press [MENU] (9) three times to exit the On Screen Display.
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock back up in the event of a power failure can only be guaranteed for maximum of 1 hour.
Preparations
•Confirm that the TV is on and the VCR viewing channel is selected.
•Turn on the VCR.
Operations
1 Press [MENU] (9) to display the
Main menu on the TV screen. |
| MENU | |||
CLOCK SET | |||||
| TUNER PRESET | ||||
| SYSTEM | ||||
| OPTION |
|
|
|
|
| TAPE REFRESH | ||||
| NAVI MEMORY 0PROG. | ||||
|
|
|
|
| |
| SELECT : |
|
| , ENTER | |
| END | :MENU | |||
2 Press [43] (28) to select [CLOCK |
|
| |||
| MENU | ||||
SET] then press [ENTER] (26). | CLOCK SET | ||||
TUNER PRESET | |||||
| SYSTEM | ||||
| OPTION |
|
|
|
|
| TAPE REFRESH | ||||
| NAVI MEMORY 0PROG. | ||||
|
| ||||
| SELECT : |
|
| , ENTER | |
| END | :MENU | |||
Direct Tuning
Follow steps 1 to 4 of Manual Tuning Procedure.
5Press [43] (28) to select [SEARCH].
6Press [Numeric] (3) to enter the number of the desired programme position.
•For other channels that require tuning, repeat steps 3, 4,
5, 6.
7Press [MENU] (9) twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps 1 to 4 of Manual Tuning Procedure.
3Set each item by pressing
[2 1 4] (28). Press [3] (28) to return to the previous item.
At the set time (TIME) point:
•When [2 1] (28) is kept pressed, the indication changes in
4Press [MENU] (9).
•The clock starts.
SP
CLOCK SET
YEAR | 2005 |
MONTH | 1 |
DATE | 1 [SA] |
TIME | 0:00 |
SELECT:
START: MENU
CLK
5Press [43] (28) to select [FINE] then press [2 1] (28) to obtain the best tuning condition.
•Press [ENTER] (26) to return the tuning to its former state.
| CH 2 |
|
|
| AFC: ENTER |
6 Press [MENU] (9) to exit the On | FINE |
| : |
| END: MENU |
| |||||
|
|
|
|
| |
Screen Display. |
|
|
|
|
|
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4Press [43] (28) to select [CLEAR] then press [2 1] (28) to select [ON].
•Repeat steps 3, 4 for other unused programme positions to skip during the selection of programme positions.
•To cancel the blanking of a programme position, select that programme position then set [CLEAR] to [OFF].
5Press [MENU] (9) twice to exit the On Screen Display.
Time Reset Function
If the clock is less than 2 minutes slow or fast, it can easily be reset to the proper time.
Example:
Resetting the clock to 12:00
1Press [MENU] (9) to display the Main menu on the TV screen.
2Press [43] (28) to select [CLOCK SET] then press [ENTER] (26).
3When the current clock displays on the VCR is between 11:58 and 12:01, press [MENU] (9) as soon as you see the 12:00. This resets the time to 12:00.
6
LSQT0879
