!
!
!
Set the switch to VCR.
Turn on the TV.
then press the button to switch on the VCR/DVD.
VCR/TV/DVD
VCR-Standby/ON
The VCR will now start Auto Setup.
VCR AUTO SETUP
VCR Display
On-Screen Display
AutoSetup
Tuning : Ch 21
-While Auto Setup is running the first digit of the VCR display will flash.
After a while it will stop flashing and the RF output channel number will
be displayed.
-
-
Select an unused channel pre-set on your TV and tune it to the RF
output channel number shown on the VCR display (or until you can
clearly see the Auto Setup screen). Storethe new video playback
channel (refer to the instructions for your TV).
If you connect your VCR/DVD to the TV by a Scart cable, you do not
need to tune the TV as described above. Simply select appropriate
input mode on TV.
Youcan complete the Owner ID now or skip this step and do it later.
Todo it later, press the button again. YourVCR is now ready to use.
Toset the Owner ID now, press the buttons or to enter a
four-digit PIN number.
Press tocorrect the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way.
Press the button to confirm each entry.
EXIT
Numeric
ENTER
ENTER
!
!
!
!
!
!
!
!
Press the buttonto leave the Owner ID screen.
Youwill now see the TV picture. Your VCR is now ready to use.
EXIT
OwnerID
PINnumber : 846*
Name :**************
HouseNo :***********
Postcode :***********
::
:
select
exit
store
ENTER
EXIT
Younow have the opportunity
toenter your details and
helpthe police crack crime
seeinstruction book.
On-Screen Display

Owner ID

DVD
TV
VCR
16