Panasonic NV-VP30EBL Clock setting, To manually adjust the clock

VCR DVD

Clock setting

On Screen Display.

Menu

Timer recording

Tuning

Clock set

Others

:select		ENTER : access
EXIT : exit
Clock set
MANUAL
Time	: 12 : 00 : 00
Date	: 11.	6. 03
Clock set
AUTO
Time	: 12 : 00 : 00
Date	: 11.	6. 03

TV

VCR DVD

Notes:

The clock will normally be set correctly during Auto-Setup however, in some circumstances the VCR cannot set the clock automatically. In this case, follow the operation steps below to manually set the clock.

To manually adjust the clock

￿Press MENU and select Clock set .

￿Press ENTER.

￿Confirm that Clock set is set to MANUAL, and press ENTER.

￿Use or Numeric buttons to set the Date and Time.

￿Press ENTER to conclude the settings.

￿Press EXIT to exit the On Screen Display.

To activate the automatic time correction function

The correct time for the VCR clock can be automatically maintained when the VCR is tuned to a station that transmits a time signal.

￿Press MENU and select Clock set .

￿Press ENTER.

￿Use to set AUTO.

￿Press ENTER to conclude the setting.

Under adverse reception conditions, etc., the Automatic time correction function may not work. In this case, the indication for Clock setting is automatically reset to MANUAL. If the reception conditions improve later on, it may be possible to activate this function.

￿Press EXIT to exit the On Screen Display.

-If Clock setting is set to AUTO when you open the Clock screen, do not set it to MANUAL, otherwise, the automatic time correction function is deactivated.

-This VCR uses a 24 hour clock.

-In case of a power failure, an automatic back-up system maintains the clock for approximate 60 minutes.

-When Clock setting is set to AUTO, the automatic time correction function checks and if necessary adjusts the time several times every day. The automatic time correction function only works when the VCR is in standby, it does not work in the timer recording mode.

35