Privacy Zones
The dome’s 28 privacy zones can be set or cleared as follows:
To SET a zone
1.Move the camera to show the scene that is to be blanked.
2.PROGRAM PRESET 64 : SET PRIVACY COMMAND
3.GOTO PRESET
The screen will now be blank showing that the privacy zone has been set and enabled.
To CLEAR a zone
1.PROGRAM PRESET 63 : CLEAR PRIVACY COMMAND
2.GOTO PRESET
The dome will now show the scene that the privacy zone was originally blanking. If you have made a mistake and this zone must be blanked then without moving the dome just follow the instructions above to SET the zone again.
Learned Path
A path is a learned tour that allows an operator to program the dome to move around specific areas for example a fence line etc. The converter uses VCL tour 5 as the path.
To DEFINE a path
1.Move the dome to the position that you would like the dome to start from.
2.From the matrix keyboard select PATROL LEARN or PROGRAM PRESET 60
3.Use the joystick to move the dome around the required path
4.From the matrix keyboard select PATROL STOP or PROGRAM PRESET 59
To PLAY a path
Press AUTOPAN to start playback of the tour.
Panasonic Protocol Converter Manual V10.2 5Mar 09 | Page 9/16 |
