Technical Specification |
|
Power Requirements | 9Vdc 500mA |
Input | 2 or 4 wire RS485 (switch selectable, SW3/8) |
| Panasonic RS485 9600,N,8,1 or 19200,N,8,1 |
Outputs | 8 * RS485, either 2 or 4 wire |
| Maximum cable run approx 4000 Feet/1200m |
Facilities | LED as power and data indication |
Other Outputs | RS232 monitor output via chassis mounted DB9 connector. |
Boxed Dimensions | 19” 1U rack 100mm deep rack mountable case. |
Version History
V10.2 5 Mar 2009 Update to show new
V10.1 6 Sept 2007 Addition of notes concerning Vicon dome integration and SX650 matrix firmware. V10 17 August 2007 Added support for Vicon dome protocol at 4800 or 9600 baud
V9 11 May 2007 Added Wash/Wipe support for Pelco protocol
V8 14 July 2006 Added support for Dennard dome protocol at 9600 baud
V7 8 Sept 2005 Added support for Pelco P at 2400, 4800 or 9600 baud
V2 5 March 2004 Improved control, LED status improved, added support for patrol and path
V1 26 Mar 2003 VCL TP protocol (9600,N,8,1)
Panasonic Protocol Converter Manual V10.2 5Mar 09 | Page 4/16 |
