Panasonic manual PRO-SW100P 100-Watt Powered Subwoofer

40-4080.fm Page 1 Wednesday, August 11, 1999 10:58 AM

Cat. No. 40-4080

PRO-SW100P 100-Watt Powered Subwoofer

Your Optimus PRO-SW100P 100-Watt Powered Subwoofer is designed to give you the best possible low fre- quency sound quality for the ultimate home theater experience. You will be astonished by the realism it adds to movie sound effects and the power it lends to all kinds of music.

The subwoofer combines the power of

abuilt-in 100-watt RMS amplifier with a responsive, 10-inch coated paper cone woofer — all housed in a ported bass-reflex enclosure to produce tight, floor-rumbling, powerful bass (down to 42 Hz) that you can feel as well as hear! The LED power indicator lets you see at a glance when the sub- woofer is operating.

Your subwoofer has an adjustable high cut filter and high and low level in- puts, making it easy to incorporate into existing systems, or you can use it as an integral part of a subwoofer/satellite combination.

It also has these features:

Auto On/Off — Automatically switch- es the PRO-SW100P’s amplifier to standby if the subwoofer does not re- ceive a signal for about 11 minutes.

Standby Indicator — Lights when the subwoofer is connected to power but not receiving a signal.

High Level Input — Lets you connect the subwoofer to an amplifier’s or re- ceiver’s speaker outputs.

High Level Output — Lets you con- nect the subwoofer between an ampli- fier or receiver (without line out terminals) and other speakers.

Low Level Input — Lets you connect the subwoofer to an amplifier’s or re- ceiver’s line out jacks. These inputs automatically sum left and right chan- nel information.

Volume Control — Lets you match the PRO-SW100P’s output level to your satellite speakers’ output (if used).

© 1998 Tandy Corporation.

All Rights Reserved.

Optimus, Megacable, and RadioShack are registered trademarks used by Tandy Corporation.