40-4080.fm Page 6 Wednesday, August 11, 1999 10:58 AM
ADJUSTING THE HIGH CUT FREQUENCY
FREQUENCY HZ adjusts the level (be- tween 50 Hz and 200 Hz) at which the subwoofer begins passing frequen- cies to other speakers. This control’s setting depends on the low frequency capabilities of your satellite speakers (if used), speaker placement, and oth- er factors that affect bass perfor- mance.
While playing music, rotate FREQUEN- CY HZ clockwise until it sounds like the music is too bass-heavy. Then rotate it counterclockwise until the bass sounds more natural.
If the mid-bass sounds natural but you want more low bass, rotate FREQUEN- CY HZ counterclockwise a little, then rotate VOLUME CONTROL clockwise by about the same amount. This in- creases low bass output without affect- ing the mid-bass output.
To reduce low bass output without af- fecting the mid-bass output equally, ro- tate FREQUENCY HZ clockwise and VOLUME CONTROL counterclockwise.
Note: Rotate FREQUENCY HZ fully clockwise (200 Hz) when using the PRO-SW100P with the Mini Home Theater Satellite Speakers (Ra-di- oShack Cat. Nos. 40-4082/4083) and Mini Home Theater Center Speaker (Cat. No. 40-4084).
6
