Panasonic PT-43LC14 manual Compatible formats, Audio signal PCM, Installation, Getting Started

Installation

Procedure

1Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.

•If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.

2Press TV/VIDEO on the Remote Control to select HDMI input.

By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminal of this Device Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)

Notes:

•Select the HDMI input position by pressing the TV/VIDEO button. (P. 35)

•The HDMI IN terminal can only be used with 1080i, 720p and 480p picture signals.

•If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.

•Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.

Compatible formats

Video Signal:

The Device display is compatible with following formats. Please set the connecting device to following format.

Display mode	No. of dots	Vertical scanning frequency (Hz)
1080i	1920 x 1080i	59.94 / 60
720p	1280 x 720p	59.94 / 60
480p	720 x 480p	59.94 / 60
	640 x 480p	59.94 / 60

Audio signal (PCM)

Please see “AUDIO SELECT” on page 43.

Getting Started

21