Panasonic PT-50LC14 Accessories, Remote Control Battery Installation, Before Using, Helpful Hints

Before Using

Accessories

1. Remote Control (EUR7627Z20)

2.Batteries 2 “AA”

3.RGB Cable (2 m) (LSJA0239-1 or LSJA0443)

Remote Control Battery Installation

Requires two AA batteries (supplied).
1. While pressing in on the catch,	2. Install the batteries as shown in	3. Press cover in direction of
open cover in direction of arrow.	the battery compartment.	arrow until it snaps shut.
	(Polarity + or - must match the
	markings in the compartment).

Two AA size

CAUTION

Incorrect battery installation can cause the batteries to leak, leading to personal injury and/or damage to the remote control.

Observe the following precautions:

1.Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.

2.Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

3.Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

4.Battery replacement is necessary when the remote control acts sporadically or stops operating the projection display set.

Helpful Hints:

(1)For frequent remote control users, replace old batteries with Alkaline batteries for longer battery life.

(2)Whenever you remove the batteries, you may need to reset the remote control infrared codes. We recommend that you record the code on page 76, prior to setting up the remote.

Getting Started

7