Panasonic PT-43LC14 Installation, Connecting the Antenna / Cable to the RF IN Terminal No VCR

Installation

Notes on connections

•Turn off the power supply for all components before making any connections.

•If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

•Read the instruction manual for each system component carefully before connecting it.

•If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will be necessary to connect a TBC (time base corrector).

Connecting the Antenna / Cable to the RF IN Terminal (No VCR)

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.

VHF Antenna UHF Antenna

Mixer

RF Coaxial Cable VHF/UHF TERMINAL

ON THE BACK OF THE

PROJECTION DISPLAY

CAUTION

When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.

12 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo