Starting to use
Turning on the power
Please ensure that all preparations have been completed before turning on the power. (Refer to pages 18 – 21.)
#Remove the lens cover. |
|
|
|
|
|
|
|
$Connect the accessory power cord. |
|
| R | VIDEO | S2 VIDEO | PC IN |
|
|
|
|
| OFF ON |
|
| |
|
|
|
| VIDEO IN |
|
| |
| AC |
|
|
|
|
| |
| IN |
|
|
|
|
| |
| ~ |
|
|
| MAIN |
| C |
|
|
|
|
| POWER |
| |
%Press the MAIN POWER switch to |
|
| R | VIDEO S2 VIDEO | PC IN |
| |
|
|
|
| OFF ON |
|
| |
|
|
|
| VIDEO IN |
|
| |
the “” side to turn on the power. |
| AC |
|
|
|
|
|
| IN |
|
| POWER |
|
| |
|
| ~ |
|
| MAIN |
|
|
The power indicator on the projector |
|
|
|
|
|
|
|
will illuminate red. |
|
|
|
|
|
|
|
&Press the POWER button. |
|
|
|
|
|
|
|
The power indicator on the projector |
|
|
|
|
|
|
|
will flash green. After a short period, | ON(G) | LAMP | TEMP |
|
|
| VOLUME |
the button will illuminate green, and a | STANDBY(R) |
|
|
|
|
|
|
POWER | INPUT | KEYSTONE | VOLUM |
| F | ||
picture will be projected. |
|
|
|
|
|
|
|
'Turn on the power of all connected |
|
|
|
|
|
|
|
devices. |
|
|
|
|
|
|
|
Start the Play function a device such |
|
|
|
|
|
|
|
as a DVD player. |
|
|
|
|
|
|
|
(Press the INPUT select button to | STANDBY(R) | LAMP | TEMP |
|
|
| VOLUME |
select the input signal. | ON(G) |
|
|
|
| ||
POWER | INPUT | KEYSTONE | VOLUM |
| F | ||
The input signal selected will change |
|
|
|
|
|
|
|
as shown at |
|
|
|
|
|
|
|
input select button is pressed. |
|
|
|
|
|
|
|
|
|
|
|
| YPBPR |
| |
|
|
|
|
|
|
| |
|
|
|
|
| VIDEO |
|
|
|
|
|
|
| PC |
|
|
)While pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector.
If there is keystone distortion in the projected images, carry out keystone correction as described on page 29.
*Turn the focus/zoom ring to adjust |
|
the projected image focus and size. | Zoom |
| Focus |
Turning off the power
#Hold down the POWER button for at least 0.5 seconds or press the POWER button twice to turn off the power.
The lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange.)
$Wait until the power indicator on the projector illuminates red (until the cooling fan stops).
Do not in any way cut power to the projector while the cooling fan is still operating. Be careful not to switch off the MAIN POWER switch of the projector, unplug the power cord from the electrical outlet or turn off
%Press the MAIN POWER switch to the “O” side to turn off the power.
NOTE:
BAfter the power is turned off, the lamp unit will take some time to cool down. If you turn the power back on again before the lamp unit has cooled down, the lamp unit may not turn on straight away, but it will turn on automatically after a short period. (During this time, the power indicator on the projector will flash orange.)
BWhen the projector is in standby mode (the power indicator on the projector is illuminated red), the projector will still draw a maximum 0.7 W of power, even when the cooling fan has stopped.
BIf the MAIN POWER switch is accidentally turned off while the projector is being used, the lamp unit may not turn on straight away after the power is turned back on. In such cases, the lamp unit will turn back on automatically after a short period. (During this time, the power indicator on the projector will flash green.)
BA tinkling sound may be heard while the power indicator is turned off, but this is not a sign of a malfunction.
Basic Operation
22 | 23 |
