28

On-screen menus

Basic menu operations
Press the “MENU” button.
The MAIN MENU appears on the screen.
Select (highlight) the desired item with
the or buttons.
Selected items are displayed in blue.
Press the “ENTER” button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : PICTURE Menu)
Highlight the desired adjustment item
with the or buttons, then change
the parameter value with the or
buttons.
(Example of separate adjustment screen)
• If no button is operated for approx. 5 seconds
while a bar graph is displayed, the screen will
return to the previous page.
MENU
PICTURE
ADVANCED MENU
OPTI0N2
TEST PATTERN
SECURITY
NETWORK
OPTION1
POSITION
LANGUAGE
SELECT ENTER EXIT
MENU
PICTURE
ADVANCED MENU
OPTI0N2
TEST PATTERN
SECURITY
NETWORK
OPTION1
POSITION
LANGUAGE
SELECT ENTER EXIT
PICTURE
SELECT ADJ RETRN
PICTURE MODE GRAPHIC
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS 06
COLOR TEMP.
ON
RGB
AI
SYSTEM

BRIGHT 32

Returning to the previouspage
• Pressing the “MENU” button returns the screen to
the previous menu page.
•
When the MAIN MENU is on the screen, pressing
the “MENU” button clears all menus from the screen.
Menu items shown intransparent characters
• Some menu items may not be valid for certain
signal formats applied to the projector.
The menu items that cannot be adjusted or used are
shown in transparent characters, and they cannot be
selected even by pressing the ENTER button.
Menu items setting
• The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt “ADJ” appears when changing
the setting.
• A prompt “ENTER” appears for a separate
bar graph.
• When and buttons are displayed above or
under the items in the “OPTION” screen, they
indicate that there are more adjustment (items).
Resetting to the factorydefault
STD (standard) button is used to reset all of the
projector adjustment values to the default levels
which were set at the time of shipment from the
factory.
PICTURE
SELECT RETRN
PICTURE MODE GRAPHIC
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS
COLOR TEMP.
ON
RGB
AI
SYSTEM
ENTER
06
• If the parameter value on a bar graph is reset to
the factory default, the bar turns to white.
Note •
The upper and lower triangular markings on
a bar graph indicate the default setting for the
parameter. If no such triangular markings are
shown on the bar graph, the parameter
cannot be reset to the factory default.
Indicates the current
parameter value. Indicates the
factory default.