46
Using Web Browser Control Access procedure
Start the web browser on your PC, then
enter the IP address which was set in
the projector.
Enter “user1” in the user name field,
then enter the password in the
password field.
The default setting is “panasonic” (all lower case). If
you have changed the password, enter the new
password here.
The host name set in the projector is displayed in
the “Realm” field.
Click [OK].
The Basic Control page is displayed.
• Do not enter settings or perform controls
with multiple web browser windows open
at the same time.
Note
Basic control page
This page is the first page displayed when the projector is accessed through a web browser.
To move from another page, click [Projector Control], then [Basic control].
This projector has networking functions which allow it to be controlled through a web browser on a PC.
The controlled items are:
• Projector’s settings and adjustment
• Projector’s status display
• Transmission of a E-mail message when the projector has a problem
Power ON/OFF control Shutter control
System type switching
Input channel switching
OSD(On-screen Display)
display/non-display