55
ENGLISH
Interface ports
RGB2 input terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YPBPRinput]
Y: 1.0 V [p-p] synchronization signal included,
PBPR: 0.7 V[p-p] 75
[For RGB input] 0.7 V[p-p] 75 For G-SYNC: 1.0 V[p-p] 75
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative polarity automatically adjusted
However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
1 set BNC
1.0 V[p-p] 75
1 set Mini DIN 4p
Y 1.0 V[p-p] C 0.286 V[p-p] 75 Compliant with S1 signals
D-sub 9-pin (male/female), RS232C compliant
Used for personal computer control
1 set each for M3 pin jack
Wired remote control, used for link control
D-sub 9-pin (female)
Used for external control
DVI-D 24-pin
RJ-45
Length of power supply cord 2.5 m
Cabinet Molded resin
Outside dimensions Width: 530 mm; Height : 167 mm; Depth: 425 mm
Mass 13.7 k
Working environment condition 2 Ambient temperature: 0 to 40°C
Ambient humidity: 20 to 80% (no condensation)
Remote control
Power source
Operation range
Mass
Outside dimensions
3 V DC (two AAA dry cells)
approx. 7 m (in front of beam receiver)
95 (including dry cells)
Width: 45 mm, Thickness: 23 mm, Depth: 145 mm
Option
Hanging attachment (For high ceiling) : ET-PKD55
Hanging attachment (For low ceiling) : ET-PKD55S
Projection lens : ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050
Wireless mouse receiver : ET-RMRC2
Replacement lamp unit : ET-LAD55 (single bulb), ET-LAD55W (double bulbs)
Long life lamp unit : ET-LAD55L (single bulb), ET-LAD55LW (double bulbs)
The outside dimensions do not include the lens and other protruding parts. See page 58 for further details.
2When using the projector at high altitudes (1 400 to 2 700 m), the upper limit for the ambient temperature drops
by 5 °C.
PT-D5500E PT-D5500EL
Model No.
12.9 k