60/62

Hexadecimal 02h *1 FEh FEh 03h

Remarks STX ID Command Option ETX

Response (Callback)

In the period when the command can be accepted

Hexadecimal 02h *5 FEh FEh *2 *3 *4 — *15 *16 *17 03h

STX ID Parameters

Acceptability

SECURITY STNDBY NO SIGNAL SHUTTER TEST PATTERN REMOTE2

Yes Yes Yes Yes Ye s Yes

Parameters (*2—*17 )
Bit Name Description Condition of Clear Bit
0 Temperature warning (IN ) Intake air temperature is the specific value or higher. It is less than t he specific
value.
1 Temperature warning (OP T) Optical module (DMD surr oundings) temperature is the
specific value or highe r.
It is less than the specific
value.
2 Temperature warning (OUT ) Exhaust air temperature is the specific value or higher. It is less than the specific
value.
3 Low temperature warning ( OPT) Optical module (DMD surroundings) t emperature is less than
the specific value.
It is the specific value or
higher.
4 Temperature error (IN) Intake air temperature is the specific value or higher. It is less than t he specific
value.
5 Temperature error (OPT) Optical module (DMD sur roundings) temperature is th e
specific value or highe r.
It is less than the specific
value.
6 Temperature error (OUT) Exhaust air temperature is the specific value or higher. It is les s than the specific
value.
7 Low temperature error (OPT) Optical module (DMD surroundings) t emperature is less than
the specific value.
It is the specific value or
higher.
8 Lamp 1 operating time w arning
9 Lamp 2 operating time w arning
10 Lamp 3 operating time warnin g
11 Lamp 4 operating time warnin g
Lamp cumulative usage time is the specific value or l onger.
12 Lamp 1 operating time exceed ed
13 Lamp 2 operating time exceed ed
14 Lamp 3 operating time exceed ed
15 Lamp 4 operating time exceed ed
Lamp cumulative usage time is the specific value or l onger.
Lamp replacement
16 Lamp 1 going out
17 Lamp 2 going out
18 Lamp 3 going out
19 Lamp 4 going out
Lamp-Goes out after turning on.
20 Lamp 1 lighting failure
21 Lamp 2 lighting failure
22 Lamp 3 lighting failure
23 Lamp 4 lighting failure
Lamp ignition failure
Executes the lamp
turning on processing.
24 Lamp 1 not installed
25 Lamp 2 not installed
26 Lamp 3 not installed
27 Lamp 4 not installed
Lamp not installed, or L amp memory read failure MAIN POWER ON after
the lamp is installed, or
Lamp memory
initialization
28 AC power supply voltage drop
warning (less than 90 V)
29 Lamp unit cover is not close d Lamp unit cover is not cl osed for 1 second or longer.
POWER ON after the lamp
unit cover is closed
30 —
31 —
2.151. SELF CHECK Information