Panasonic PT-DW5000UL manual Using the remote control unit, Loading dry cells

Using the remote control unit

Loading dry cells

When loading batteries into the battery compartment of the remote control, make sure that their polarities are correct.

1. Open battery compartment lid.

Open the lid in the order of steps and .

2. Insert the dry cells.

Into battery compartment, with their polarities orientated as indicated ( , ) in the compartment.

Accessory type-AAA dry batteries (insert the negative side first).

3. Close the battery compartment lid.

Replace the battery compartment lid over the compartment and slide until it clicks.

Attention • Do not drop the remote control unit.

•Do not expose remote control unit to any liquid.

•Do not use NiCd batteries.

Effective range of remote control operation

The remote control should normally be aimed at either the front or rear remote control receiver window on the projector (figure 1). Otherwise, it may also be aimed at the screen, which will reflect commands back to the projector’s front receiver window as illustrated in figure 2.

The effective control range is approx. 7 meters from the beam receiver on the front or rear.

Remote	30˚	30˚	Remote
control			control
	30˚	30˚
(Front)		(Rear)
		[Top view]
Remote	15˚
control		15˚	Remote
	15˚		control

[Side view]	15˚
Figure 1

Screen

Projector

Remote control	Remote control
receiver window
	receiver window
(front)
	(rear)
Remote control
Figure 2

Note • When the remote control is aimed at the screen, the effective control range may be reduced due to the optical loss by screen reflection.

•The remote control may not function properly if an object is in the light path.

•The remote control receiver may not function properly in intense ambient light such as fluorescent lamps.

Carefully site the projector so its remote control receiver windows will not be directly exposed to intense light.

14