■■Connection terminals

(1)

(2)

(3)

(1)DVI-D input terminal <DIGITAL IN>

This terminal is for inputting the DVI-D signal.

(2)HDMI input terminal <HDMI IN>

This terminal is for inputting the HDMI signal.

(3)Computer input terminal <ANALOG IN> This terminal is for inputting an RGB signal.

(4)RGB 5BNC input terminal <G,B,R,H/HV,V IN>/<VIDEO IN>/<Y,Pb/Cb,Pr/Cr IN>

This terminal is for inputting the G,B,R,H/HV,V signal, video signal, and Y,Pb/Cb,Pr/Cr signal.

(5)USB terminal <USB>

This terminal is for use by service personnel.

About your projector

(5)

(6)

(7)

(8)

(9)

(10)

(4)

(6)Serial input terminal <SERIAL IN>

This input terminal is compatible with RS-232C and for externally controlling the projector by connecting the projector.

(7)Serial output terminal <SERIAL OUT>

This terminal is for outputting the signal connected to the serial input terminal.

(8)Wired remote control terminal <REMOTE IN>

This terminal is for connecting the remote control cable when using the remote control as a wired remote control.

(9)LAN terminal <LAN>

This terminal is for connecting the projector to the network.

(10)S-VIDEO input terminal <S-VIDEO IN> This terminal is for inputting S-video signals.

Preparation

Attention

zzMake sure to connect the LAN cable to the indoor equipment.

ENGLISH - 23