6)Select the light-shielding plate to be attached.

zzLight-shielding plate for each lens

Refer to the following table and use an appropriate light-shielding plate.

Accessory (product name)

Lens Model No.

 

 

Light-shielding plate-1

ET-ELW03*1

(T0CRS0008--1)

 

Light-shielding plate-2

ET-ELW04,

(T0CRM0014--1)

ET-ELW06,

 

ET-ELS02,

 

ET-ELS03,

 

ET-ELT03

is inscribed

 

Light-shielding plate-3

ET-ELW02,

(T0CRM0013--1)

ET-ELW03*1,

 

ET-ELT02,

 

ET-ELM01

is inscribed

*1: Use the light-shielding plate-1 and light-shielding plate-3 together.

Attention

zzThe light-shielding plate-2 and light-shielding plate-3 should be separated to the upper and lower plates.

Upper plate

Lower plate

zzMake sure that the shape of the light-shielding plate matches the lens.

zzMake sure that the attaching direction of the light- shielding plate is correct and set them properly.

7) Insert the lower light-shielding plate.

Attaching the lens

8)Attach the lens into the projector body.

(i)Hold the lens lock lever and slide it upward to release the lock, and then insert the lens with the lens attachment into the projector body.

(ii)Hold the lens lock lever and slide it downward until the lever clicks to secure the lens.

•When attaching the motor driven lens, be sure to move the motor to the right side to attach the lens.

•After attaching the lens, make sure that the lens is not loose and is properly attached.

9) Adjust the focus of the projection lens (ET-ELW03 only).

zzFor details, refer to “Adjusting the focus” ( page 30).

zzIf the focus adjustment is not necessary, go to Step 10).

Getting Started

ENGLISH - 27