Switching the projector on/off
Switching on the projector
1. | Switch the MAIN POWER on. | 3. Press the POWER button. |
| The power indicator lights up in RED. | The power indicator lights up in GREEN after |
2. | Open the Front panel cover. | flashing for a while. |
| This is not necessary in Remote control operation. | The STARTUP LOGO is displayed on the screen. |
|
| See “STARTUP LOGO” on page 34. |
NOTE:
•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector.
•When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound depends on the external temperature.
•If you disconnected the Mains lead or switched off the MAIN POWER while on projecting mode, the projection will start with connecting the Mains lead or switching on the MAIN POWER. See “DIRECT POWER ON” on page 35.
Switching off the projector
Basic Operation
1.Open the Front panel cover.
This is not necessary in Remote control operation.
2. Press the POWER button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.
To return to the projection, press any button except the POWER button.
3. Press the POWER button.
The power indicator lights up in ORANGE while cooling the lamp, then illuminates RED when is ready to switch off the MAIN POWER.
4.Switch off the MAIN POWER on the back of the projector.
NOTE:
•Press the POWER twice or for a long duration to switch the power off.
•You can disconnect the Mains lead or switch off the MAIN POWER instead of following this procedure. See “DIRECT POWER ON” on page 35.
•You can turn off the projector by pressing the POWER button longer than 0.5 seconds.
