POSITION menu
ASPECT | 16:9 | |
When a16:9 is input, the image will be projected | ||
You can switch the aspect ratio manually when needed. | without any change, and other signals will be | |
adjusted to 16:9 without preserving original ratio. | ||
Press I H to cycle through the options. | ||
| ||
Aspect ratio options |
| |
AUTO |
| |
Signals which contains an identifying aspect signal |
| |
will be detected and automatically project the |
| |
image in proper ratio. (NTSC and 525i (480i) |
| |
signals only) |
|
4:3
When a 4:3 or 5:4 signal is detected, the image will be projected without any change, and other signals will be adjusted to 4:3 with preserving original ratio.
S4:3
The input signal will be sized down 75 % and projected. When projecting 4:3 signal on to a 16:9 screen, it will be sized down 75 % with preserving original ratio.
THROUGH
The image will be projected without any size adjustment.
Settings
NOTE:
•If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio which preserves the intention of the image creator.
•The order of ASPECT types is defined not only by the input method but also by the input signals. See “List of compatible signals” on page 54.
•If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.
•Selectable aspect ratio options vary according to input signals.
