ENGLISH - 25
Basic Operation
Remote control operation
You can operate the projector with the remote control
within the remote range 15 m (49'2"), approximately
± 30° vertically and horizontally.

QFacing to the projector

Ensure the remote control emitter is facing to the
remote control signal receptor on front/back of the
projector and press the required buttons to
operate.

QFacing to the screen

Ensure the remote control emitter is facing to the
screen and press the required buttons to operate
the projector. The signal will be reflected off the
screen. The operating range may differ due to the
screen material. This function may not be effective
with a translucent screen.
You can adjust the setting of SHIFT, DOT
CLOCK and CLOCK PHASE in the POSITION
menu automatically for the projected
COMPUTER signal image.
With DVI signal, adjust SHIFT setting only.

Operating range

(Shown as PT-F300NTU)
NOTE:
• Do not let stro ng light shine onto the signal receptor.
The remote control may malfunction under strong light
such as fluorescent.
• If there are any obstacles between the remote control
and the remote control signal receptor, the remote
control may not operate correctly.

Setting up the image position automatically

NOTE:
• If the dot clock frequency i s 150 MHz or higher, AUTO
SETUP is not effective.
• If the projected imag e is dark or blurred around the
edge, AUTO SETUP may stop the processing before
complete. Project a much clearer or lighter image and
press the AUTO SETUP button again.
• When ther e is no signal input and SIGNAL SEARCH in
DISPLAY OPTION menu is ON, the auto signal
detecting system will start.
Screen Projected image