Panasonic PT-F300U, PT-F300NTU manual Security menu, Password Change, Text Display, Text Change

SECURITY menu

Settings

Remote control Control panel

See “Navigating through the menu” on page 32. See “Main menu and Sub-menu” on page 30.

Entering the SECURITY menu

Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.

PICTURE	PASSWORD	OFF
POSITION
	PASSWORD CHANGE
LANGUAGE
	TEXT DISPLAY	OFF
DISPLAY OPTION
	TEXT CHANGE
PROJECTOR SETUP
	MENU LOCK	OFF
SECURITY
	MENU LOCK PASSWORD
NETWORK
	CONTROL DEVICE SETUP
	PASSWORD
RETURN
ENTER

When you apply to the SECURITY menu before you change the password to your original, perform to input the following factory default password operation.

Press F H G I F H G I and the ENTER button.

After you change the password

When you apply to the SECURITY menu after you change the password to your original in the PASSWORD CHANGE menu, input the original password operation.

NOTE:

•The factory default password is valid until you change the password in PASSWORD CHANGE menu.

•The entered password operations will appear as asterisks in the box.

PASSWORD

You can activate the security system and the password operation will be asked to perform when the projecting mode started. Unless you perform the correct password operation, all of the button controls will be disabled except the power button.

OFF	Deactive
ON	Active

PASSWORD CHANGE

You can change the password operation to your original.

1.Press a series of button operation up to 8 as a password by using F G I and H.

2.Press the ENTER button.

3.Press the exact same series of button operation you entered in the NEW password box for confirmation.

If a series of button operation is incorrect, you will be asked to perform again.

4.Press the ENTER button.

NOTE:

•The entered password operations will appear as asterisks in the box.

TEXT DISPLAY

You can set your original text, such as company name or URL information, to display regularly at the bottom of the projected image while projecting.

OFF	Deactive
ON	Active

TEXT CHANGE

You can enter your original text up to 22 characters for

TEXT DISPLAY.

TEXT CHANGE

	ALL DELETE
	SPACE
OK	CANCEL

1. Enter your original text.

Use F G I H to specify the location of the required character.

Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicated with the cursor in the text line. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 2.

2. Press the ENTER button.

The selected character will be displayed in the TEXT CHANGE box.

		3. Repeat until finish your original text.
NOTE:
		4. Select OK and press the ENTER button to set the
•	When you activated the security system, make sure to
		entered text.
	change the password to your original for safety.
		Select CANCEL or press the MENU/RETURN
•	The factory default password is valid until you change
		buttons to return to the previous menu.
	the password in PASSWORD CHANGE menu.

ENGLISH - 44