Remote control operation
Projecting 2 images at a time
You can project the image and another source of image at the same time in double window style. Press any button of RETURN, MENU, SIDE BY SIDE or INPUT SELECT buttons to return to the normal projection style.
Unavailable combinations
The following combinations are not available.
COMPUTER1 - COMPONENT
COMPUTER2 - NETWORK
VIDEO - COMPONENT
NOTE:
•FREEZE and VOLUME controls are available with the first image only.
•While SIDE BY SIDE is activated, DIGITAL ZOOM,
•While SIDE BY SIDE is activated, the main menu will not be displayed.
•The second image will apply to the value of the PICTURE settings of the first image except CONTRAST and BRIGHTNESS.
•COMPUTER and NETWORK signals will not keep the adjusted aspect ratio.
Switching the signal
In default, the first image is displayed on the left and the second image is displayed on the right. You can switch and cycle through the signals of the second image by pressing F G
Image 1 | Image 1 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
Image 2
Basic Operation
COMPUTER1 |
|
| COMPUTER2 |
|
| |||||||||
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NETWORK |
|
| COMPONENT |
|
| VIDEO | ||||||||
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enlarging the centred area
You can enlarge the projected image down | 2. Adjust the image size by pressing DIGITAL ZOOM |
to a centred area for emphasizing within the | |
range of 1x to 2x. | The image size will be changed in steps of 0.1. |
NOTE:
•When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 35.
•When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
•While DIGITAL ZOOM is activated, FREEZE is not available.
Enlarging the image
1.Press DIGITAL ZOOM +/- once.
The centred area of the image will then be enlarged to 1.5x.
Shifting the centre point
Press F G I H to shift the centre point.
Controlling the volume of the speaker
You can control the volume of the
NOTE:
•Power consumption can be reduced if the volume level is lowered.
