![](/images/new-backgrounds/1266125/26612583x1.webp)
Care and Replacement
Cleaning the projector
Before cleaning the projector
Switch off the MAIN POWER and disconnect the mains plug from the mains socket.
Unplug all the cables from the projector.
Cleaning the outer surface of the projector
Wipe off dirt and dust gently with a soft cloth.
If it is difficult to remove the dirt, soak a cloth in a neutral detergent diluted with water, wring the cloth well and then wipe the projector. Dry off the projector with dry cloth.
If you use a chemical treated wipe, follow the instructions supplied with it.
Cleaning the lens and front glass surface
Wipe off dirt and dust gently with a
Make sure no dirt or dust remains on the surface of the lens. It will be enlarged and projected onto a screen.
Replacing the ARF (Auto Rolling Filter)
Before replacing the ARF
Press the POWER button for at least 0.5 seconds or press twice to turn off the projector. Wit until the cooling fan stops and the POWER indicator turn to RED.
Disconnect the Mains lead from the main socket. Prepare a
Contact an Authorised Service Centre to purchase a replacement ARF
When to replace the ARF
ARF is consumable product and effects on ventilation. FILTER indicator will inform you of the replacement timing. You can check the remaining amount of the ARF in FILTER REMAINING menu.
NOTE:
•See “FILTER REMAINING” on page 36.
•See “FILTER indicator” on page 41.
Replacement procedure
Maintenance
1.Turn the projector upside down and place it gently on a soft cloth.
2.Use a
ARF cover fixing screw
5.Attach the ARF cover and tighten the ARF cover fixing screws securely with a
ARF fixing screw | ARF |
PUSH 押す |
|
Clamp
Soft cloth
ARF cover
NOTE:
3.Use a
4.Insert the new ARF into the compartment in correct direction and slightly push down until it clicks. Tighten the ARF fixing screws securely with a
•If the ARF and/or ARF cover are attached incorrectly, the projector may not be turned on.
•Do not switch the power on while the ARF cover removed.
•When you replace the ARF unit, clean the compartment and/or the Air Exhaust port if you need to.