OPTION menu

 

WIDE MODE

HIGHLAND

You can turn ON/OFF the WIDE MODE setting.

Settings

If you use the projector at high elevation, the HIGHLAND setting need to be ON to set the fan speed high. Press I H to select the required option.

OFF

The fan speed is low.

ON

The fan speed is high.

NOTE:

At 1 400 m (4 593 ft) above sea level, the setting must be ON.

The loudness of fan noise depends on the HIGHLAND setting.

TEST PATTERN

You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 18.

1.Press ENTER to display the test pattern 1.

2.Press I H to select the required test pattern.

3.Adjust the focus with the Focus lever.

4.Press MENU or RETURN to return to the previous menu, oar press repeatedly to escape the menu mode.

NOTE:

When the projector and/or the screen is tilted, adjust the focus at the centre of the image. The upper and lower edge might be out of focus.

When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.

DETAILED SETUP

You can perform more detailed setting in various items.

OSD DESIGN

You can change the background colour of the menu. Press I H to select the required option.

TYPE1

Semi transparent black

 

 

TYPE2

Solid blue

 

 

TYPE3

Semi transparent dark blue

 

 

SXGA MODE

You can switch the setting between SXGA and the larger setting, SXGA+. Press I H to select the required option.

ON

For WIDE signals

OFF

For other type of signals

BLACKBOARD

You can exclude the BLACKBOARD in menu items of PICTURE MODE in PICTURE menu. Press I H to select the required option.

ON

Include the BLACKBOARD in menu

 

items.

OFF

Exclude the BLACKBOARD in menu

 

items.

BACK COLOR

You can choose a BLUE or BLACK screen for when the projector is idle. Press I H to select the required option.

VOLUME

You can adjust the volume of the built-in monaural speaker and VARIABLE AUDIO OUT terminal.

IDecrease

H Increase

AUDIO BALANCE

You can adjust to hear the sound played equally through both right and left external stereo speakers, or shift the balance so more sound plays through the left or right side.

IMore sound plays through the left

side

HMore sound plays through the right side

INITIALIZE ALL

You can reset all of the customised settings to the factory defaults except NETWORK, LAMP RUNTIME and FILTER REMAINING menu settings.

1.Press the ENTER button

2.Turn off the projector by pressing the POWER button.

3.Switch off the MAIN POWER button to reset the projector.

4.The minimum required setting screen will be displayed.

See “Minimum required setting screen” on page 12.

ENGLISH - 38

Page 38
Image 38
Panasonic PT-FW100NTE manual Highland, Test Pattern, Semi transparent black, Solid blue, Semi transparent dark blue