Switching the projector on/off
POWER and POWER LOCK indicators
The POWER indicator informs you the status of the power and the POWER LOCK indicator shows the status of the RELEASE button.
| POWER LOCK |
| |
| indicator |
| |
| POWER |
| |
| indicator |
| |
POWER LOCK indicator status |
| ||
Indicator status | Status |
| |
| No power is supplied. |
| |
No illumination or flashing | The RELEASE button is pressed and the POWER button is unlocked. |
| |
| The power is on. |
| |
Lit | The POWER button is locked. |
| |
Red |
|
| |
Flashing | Pressing the locked POWER button. | Operation | |
POWER indicator status | |||
| |||
Indicator status*1 | Status |
| |
No illumination or flashing | No power is supplied and the internal cooling fan is not operating. | Basic | |
Red | The power is supplied and in standby mode*2, and the POWER button is locked. | ||
Lit |
| ||
Flashing | Preparing for wireless connection. |
| |
| |||
|
| ||
Flashing | The power is on and preparing for projection. |
| |
Green |
|
| |
Lit | Projecting. |
| |
Lit | No power supply and the internal fan is cooling the lamp by internal power supply. |
| |
Orange | The power is switched on again while cooling the lamp and recovering to the |
| |
Flashing |
| ||
projection mode. Recovery may take a while. |
| ||
|
| ||
*1. When the LAMP or TEMP indicator is flashing, the POWER indicator will not light. |
| ||
*2. The electric consumption in standby mode is 4.0 W. |
| ||
