SECURITY menu

Remote control

Control panel

MENU

RETURN

See “Navigating through the MENU” on page 27. See “Main menu and Sub-menu” on page 28.

Entering the SECURITY menu

Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.

PICTURE

INPUT PASSWORD

OFF

POSITION

PASSWORD CHANGE

 

LANGUAGE

 

TEXT DISPLAY

OFF

OPTION

TEXT CHANGE

 

SECURITY

 

 

 

WIRELESS

 

 

 

PASSWORD

 

RETURN

 

 

ENTER

 

 

Before you change the password to your original

Perform to input the following factory default password operation.

1.Perform F H G I F H G I.

2.Press the ENTER button.

After you change the password

You can change to your original password in the PASSWORD CHANGE menu.

1.Perform the original password operation.

2.Press the ENTER button.

NOTE:

The factory default password is valid until you change the password in PASSWORD CHANGE menu.

The entered password operations will appear as asterisks in the box.

When the projector is initialized, it will be reset to the factory default password operation.

INPUT PASSWORD

You can activate the security system and the password operation will be asked to perform when projecting mode started. Unless you perform the correct password operation, all of the button controls will be disabled except the POWER button.

OFF

Deactive

ON

Active

NOTE:

When you activated the security system, make sure to change the password to your original for safety.

The security system is deactivated by default and when initialized.

When the projector is initialized, it will be reset to the factory default password operation.

PASSWORD CHANGE

You can change the password operation to your original.

1.Press a series of button operation up to 8 as a password by using F G I and H buttons.

2.Press the ENTER button.

3.Press the exact same series of button operation you entered in the NEW password box for confirmation.

If a series of button operation is incorrect, you will be asked to perform again.

4.Press the ENTER button.

NOTE:

The entered password operations will appear as asterisks in the box.

Change your password regularly.

Do not use too simple password to guess.

TEXT DISPLAY

You can set your original text, such as company name or URL information, to display regularly at the bottom of the projected image while projecting.

OFF

Deactive

ON

Active

Settings

ENGLISH - 39

Page 39
Image 39
Panasonic PT-LW80NTU manual Input Password, Password Change, Text Display, Entering the Security menu