Installation
Notes on connections
•Turn off the power supply for all components before making any connections.
•If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.
•Read the instruction manual for each system component carefully before connecting it.
•If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will be necessary to connect a TBC (time base corrector).
Connecting the Antenna / Cable to the RF in Terminal (No VCR)
Antenna Connection
For proper reception of VHF / UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.
| VHAntennaF | UHFAntenna |
RF | Mixer |
|
CoaxialCable |
| |
VHF/UHFTERMDISPNAL PROJECTIONTHEBACKOFTHEAY
WARNING
When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.
12
For assistance, please call :
