Before Use
2 Attach the charged Battery to the Camcorder.
Disconnecting the Power Source
Set the [OFF/ON] Switch 40 to [OFF], and while sliding the [BATTERY RELEASE] Switch 44 , remove the Battery downward or DC Cable.
•When attaching or removing Battery, set the [OFF/ON] Switch to [OFF] and make sure the [POWER] Lamp is not lit.
40
44
• For other notes concerning this item, see page 56.
Charging Time and Available Recording Time
| A | 1 h |
B | 2 h 10 min. (1 h 45 min.) |
ACharging Time
BMaximum Continuous Recording Time
•“1 h 30 min.” indicates 1 hour and 30 minutes.
•Battery
•The times shown in the table are approximate times. The numbers indicate the recording time when the Viewfinder is used. The numbers in parentheses indicate the recording time when the LCD Monitor is used. In actual use, the available recording time may be shorter.
•The times shown in the table are for continuous recording at a temperature of 68 °F (25 °C) and humidity of 60 %. If the Battery is charged at a higher or lower temperature, the charging time may be longer.
•The available recording time becomes shorter if you use both of Viewfinder and LCD Monitor simultaneously when rotating the LCD Monitor forward to record yourself or setting [EVF ON/AUTO] to [ON].
The Grip Belt
To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of your hand.
1Detach the end of the Grip Belt.
2Adjust the length of the Grip Belt to the size of your hand.
3Reattach the Grip Belt.
Re-attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
•The Lens Cap and Lens Cap Cord come preattached to the Grip Belt.
1Pass one end of the Lens Cap Cord through the attached eye on the Lens Cap. Then pass the Lens Cap through the loop made by itself and pull tight.
•When not using the Lens Cap, pull the Lens Cap Cord in the direction of the arrow. 1
•When you are not recording, be sure to cover the Lens with the Lens Cap for protection. 2
1 
2
14 |
|
For assistance, please call : | |
|
