Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1Set the [OFF/ON] Switch 40 to [ON].
• The [POWER] Lamp 37 lights up.
40
37
2 Set the Mode Dial 36 to Tape Playback Mode.
36 
3Press the [ 
] Button 16 to rewind the tape.
16
•Rewind the tape to the point where you want to start playback.
•When the tape reaches the beginning, rewinding stops automatically.
4Press the [►] Button 14 to start playback.
• The [ 
] Indication appears.
14
•If a cassette recorded with copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [ 
] Button 15 .
Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever 24 to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
24
To adjust the volume with the Remote Control, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
•The sound volume cannot be adjusted using the Remote Control in Playback Zoom Mode. (pp.
•For other notes concerning this item, see page 59.
Finding a Scene You Want to Play Back
Cue/Review Playback
16 
13
If the [
] Button 13 or [ 
] Button 16 is pressed during Playback, it turns to Cue Playback
Aor Review Playback B .
AB
•If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
15
33
