Recording Mode
3 Move the Joystick Control [◄] or [►] 33 until the [ 
] Indication is displayed.
S P 3 h 5 9 m 5 9 s 2 9 f R 2 : 0 0
►
3/3 
1 2 : 3 4 : | 5 6 A M |
| |
J A N | 2 | 2 0 0 | 5 |
4 Point the Camcorder at a
5 Move the Joystick Control [▲] 33 until the [ 
] Indication stops flashing.
To Resume Automatic Adjustment
Move the Joystick Control [◄] or [►] 33 until the [ 
] Indication appears. Or, set the [AUTO/ MANUAL/FOCUS] Switch to [AUTO].
About White Balance Sensor
The White Balance Sensor 14 determines the nature of the light source during recording.
14
•Do not cover the White Balance Sensor with your hand during recording because White Balance will not function normally.
Outside of the effective range of Automatic White Balance Adjustment, the image will become reddish or bluish. Even within the effective range of Automatic White Balance Adjustment, the Automatic White Balance Adjustment may not function properly if there is more than one light source. In this case, adjust the White Balance.
1)The effective range of Automatic White Balance Adjustment on this Camcorder
2)Blue sky
3)Cloudy sky (rain)
4)TV screen
5)Sunlight
6)White fluorescent lamp
7)Halogen light bulb
8)Incandescent light bulb
9)Sunrise or sunset
10)Candlelight
•For other notes concerning this item, see pages 52~53.
Manual Shutter Speed Adjustment
Useful for recording fast-moving subjects.
• Set to Tape/Card Recording Mode.
1 Set the [AUTO/MANUAL/FOCUS] Switch 24 to [MANUAL].
3/3
24
•The [ 
] Indication and the
2 Move the Joystick Control [▼] 33 until the
Shutter Speed Indication appears.
S P 3 h 5 9 m 5 9 s 2 9 f R 2 : 0 0
► 1 / 6 0
3/3 
33 | 1 2 : 3 4 : 5 6 A M |
|
| J A N 2 2 0 0 | 5 |
3 Move the Joystick Control [◄] or [►] 33 to adjust the shutter speed.
Range of Shutter Speed Adjustment
The standard shutter speed is 1/60 s when the EIS is OFF.
Selecting a speed closer to [1/8000] causes the shutter speed to be faster.
To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to [AUTO].
• For other notes concerning this item, see page 53.
30 | For assistance, please call : |
|
