Playback Mode
Formatting a Card
If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card.
•When formatting the card all protected files (lock) are also deleted.
•Set to Picture Playback Mode.
•The
1 Set [ 
ADVANCE] >> [
CARD FORMAT] >> [YES].
28
33
• A confirmation message appears, select [YES] | ||
and formatting will be carried out. | ||
| CARD FORMAT | |
DELETES ALL DATA | ||
| NO |
|
| YES |
|
SETUP | ENTER | EXIT |
• When the formatting is completed, the screen | ||
becomes white. |
|
|
• It may not be possible to use a Card formatted by | ||
this Camcorder on another unit. In this case, format | ||
the Card on the unit which will use the Card. Make | ||
sure that valuable pictures are stored on your PC | ||
before proceeding. |
|
|
• Normally, it is not necessary to format the card. If | ||
a message appears even though you insert and | ||
remove the card several times, format it. | ||
• If the SD Memory Card is formatted on other | ||
equipment, the time spent for recording may become | ||
longer. |
|
|
If the SD Memory Card is formatted on a PC, it | ||
cannot be used on the Camcorder. | ||
Format the SD Memory Card on the Camcorder, in | ||
this case. |
|
|
• The Camcorder supports SD Memory Cards | ||
formatted in FAT12 system and FAT16 system | ||
based on SD Memory Card Specifications. | ||
Playing Back on Your TV
By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen.
•Before connecting them, turn off the power of both the Camcorder and TV.
1 Insert a recorded tape into this Camcorder.
2 Connect the [AV OUT] Jack of the Camcorder and the Video and Audio Input Jacks of the TV.
[VIDEO IN] 
[AUDIO IN]
1
•Connect to the TV with the AV Cable 1 .
•When plugging the pin plug of the AV cable into the [AV OUT] Jack, plug it in as far as it goes.
3 Turn on this Camcorder and set the Mode Dial 32 to the Tape Playback Mode.
4 Select the input channel on the TV.
5 Move the Joystick Control [▲]
33to select the [ 
] to start playback.
•The image and audio are output on the TV.
6 Move the Joystick Control [▼] 33 to select the [ 
] to stop playback.
If the image or audio from this Camcorder is not output on the TV
•Check that the plugs are inserted as far as they go.
•Check the connected terminal.
•Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)
• For other notes concerning this item, see page 53.
36 | For assistance, please call : |
|
