TO BAKE OR ROAST
PUSH WHEN | TURN TO |
FINISHED | SET TEMP |
PUSH
The red display will show the oven temperature as it rises (in 5° steps).
Atone will sound when the oven is ready.
DELAYED BAKE CYCLE
TURN TO | TURN TO | TURN TO |
SETLENGTH | SET TEMP | |
OFCOOK |
| TURN OFF |
TIME |
| TIME(TIME |
|
| OF DAY) |
T_ER CLOCKSTOP COOK
TIME CLEAN TIME BROIL BANE
PUSH PUSH PUSH
When cook time has ended, a tone will sound and the oven will turn off.
AUTOMATIC OVEN OFF
TURN TO SET | TURN TO |
LENGTH OF I | SET TEMP |
COOK TIME |
|
orE.
T,., ___LI LI
PUSHPUSH
The control will calculate when to turn the oven off.
When the stop time is reached, a tone will sound and the oven will turn off,
INCOMPLETE OR INCORRECT
SETTINGS
1.Attention Tone will sound if oven has only been partially programmed. For example, il you have selected acook time but no temperatu re, you will hear the Attention Tone until you select a temperature or push CANCEL.
2.Function Error Tone will sound if there is a problem with oneofthe range functions. Cancel the tone bypushing the CANCEL button. If the tone starts again, call for service.
RECALLING FUNCTIONS
You may recall any set function by pushing the button of that function.
TO USE THE TIMER
TURN TO
SET AMOUNT
OF TIME
SET
TIMERCLOCKSTOP CLEANCOOKBROILBAKE
TIME TtME
PUSH | PUSH AND HOLD |
| 3 SECONDS TO CANCEL |
A tone will sound when time is up.
NOTE: Thetlmerlsaremlnderonlyandwillnotoperate the oven.
CANCELLING TONES
If you prefer that your range not have a tone whenever you push a button, you can eliminate those tones by pushing and holding the CANCEL button until you hear a beep. Repeat to activate tones again.
PREHEATING FOR AUTOMATIC OVEN
OPERATIONS
Cook times programmed for automatic oven operations start counting down when the oven first comes on, not when it has reachedthe set temperatures. It takes 10to 15 minutes to reach the set temperatu re, thus additio nal cook time may be
necessary.
16 | |
|
