INSTALLATION

INSTALLER: Leavetheseinstructionswiththe

OWNER: Keep these instructions for future

appliance,

use.

TOOL LIST

1/2", 1-3/16" and 1-3/8"open end or adjustable wrenches Pipe wrench

1/8" and 1/4" flat blade screwdriver Phillips screwdriver

Pliers

Pencil

Rule or tape measure and straightedge

Hand saw or saber saw

LOCATION

The distance from the floor to the top of the counter must be at least 35 7/8". The maximum counter height is 38".

You should not put the range near an outside door or where a draft may affect use.

Cabinet space directly over the range should not be used.

You could be seriously injured when reaching over the range for items stored in such cabinets. This hazard can

be reduced by installing a range hood that projects a minimum of 5" beyond the bottom of the cabinets. Cabi- nets installed above the range may be no deeper than 13".

Some vinylwall tiles and floor coverings, as well as some indoor-outdoor carpeting, soften at fairly low tempera- tures. If you are unsure of the heat resistance of a material, put a protective covering under the range to prevent possible heat damage during range use.

Recommended location for the gas inlet pipe and electri- cal outlet are shown in Figure 1.

Seal all openings in the wall behind and the floor below the range, before you slide the range into place.

This range is designedto be installed in a30"wide opening. See next page for dimensions. The counter opening must be 25" deep and may be notched on each side when the backguard is used. If the filler is used instead of the backguard, see the following page for more information.

CLEARANCES

There must be at least 30" between the cooktop and any overhead cabinets for an area equal to the width and depth of the range (30" by 28").

You must keep a clearance of at least 2" between the range sides and any material that could catch fire, from the cooktop upward, to a height of at least 18".

Refer to Figures 1-7 for all rough-in and minimum clear- ance dimensions.

ALTERNATE R_GID GAS PiPE LOCATION

7 1/4" FROM LEFT CABINET SIDE AND

33 1/2" FROM FLOOR

RECOMMENDED ELECTRICAL OUTLET

INSTALLATION TO BE IN AREA 1 1/2" - 18"

FROM FLOOR AND 6" TO 20 3/4" FROM

RIGHT S/DE OF RANGE

J

I

RECOMMENDED RIGID GAS PIPE

LOCATION 7 1/4" FROM LEFT CABINET

SIDE AND 1 I/2" FROM REAR WALL

oc .uo, o

J

BY RANGE

 

 

 

 

MINIMUM DIMENSIONS

BETWEEN

Fig 1

Fig. 2

COOK'FOP CABINETS

AND WALLS

3

GINS100

Page 4
Image 4
Sears 36519, 36511 owner manual Tool List, Location

36511, 36519 specifications

Sears 36519 and 36511 are notable appliances in the home and kitchen sector, highly regarded for their combination of efficiency, functionality, and stylish design. Both models cater to a distinct market segment, with a focus on enhancing the convenience of daily tasks while also providing energy efficiency and innovative technology.

The Sears 36519 model is primarily recognized for its cutting-edge features that streamline cooking and food preparation. With a large capacity and versatile cooking options, it allows users to explore various culinary techniques such as baking, roasting, and broiling with ease. One of the main highlights of the 36519 is its intuitive control panel, which offers easy navigation through different cooking modes and settings. This appliance also comes equipped with smart technology that can connect to home Wi-Fi networks, enabling users to access recipes, cooking tips, and even receive notifications on their smartphones.

On the other hand, the Sears 36511 model emphasizes energy efficiency and sustainability, making it an excellent choice for eco-conscious consumers. This appliance has received high energy ratings, showcasing its capability to consume less electricity without compromising performance. It features advanced insulation technology, which not only retains heat effectively but also minimizes environmental impact. Additionally, the 36511 includes a self-cleaning function, allowing for hassle-free maintenance and a focus on longevity and durability.

Both models also feature sleek and modern designs that fit seamlessly into various kitchen aesthetics. Their stainless steel finishes add a touch of elegance, and the ergonomic design ensures convenience during operation. The user-friendly interfaces further enhance the overall experience, allowing individuals of all culinary skill levels to maximize their kitchen productivity.

In terms of safety, both the 36519 and 36511 incorporate several key measures, including automatic shut-off functions and child lock features that provide peace of mind in busy family households. The combination of these characteristics makes both the Sears 36519 and 36511 exemplary choices for consumers seeking reliable and efficient appliances that deliver excellent performance while prioritizing sustainability and user-friendliness. Overall, these models reflect Sears' commitment to innovation and quality in household appliances.