Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1Set the [OFF/ON] Switch (42) to [ON].
≥The [POWER] Lamp (43) lights up.
ON
(42)
POWER
(43)
2Set the Mode Dial (39) to Tape Playback
Mode.
(39)
3Press the [6] Button (13) to rewind the tape.
ªAdjusting the Sound Volume
To adjust the volume, push the [sVOL/JOGr] Lever (36) to display the [VOLUME] Indication. Push the [sVOL/JOGr] Lever towards [T] to increase the volume or push the [sVOL/JOGr] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
VOL/JOG
W T
(36)
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
STILL
s 
ENTER 
i
FADE
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops automatically.
4Press the [1] Button (11) to start playback.
≥The [!] Indication appears.
(11)
STILL
s 
ENTER 
i
FADE
≥If a cassette recorded with a copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [∫] Button (12).
STILL
(12) 
s 
ENTER 
i
FADE
Finding a Scene You Want to Play Back
ªCue/Review Playback
STILL
s 
ENTER 
i
FADE
(13)(10)
If the [5] Button (10) or [6] Button (13) is pressed during Playback, it turns to Cue Playback
Aor Review Playback B.
A B
≥If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.