Editing Mode

Editing Mode

Audio Dubbing

You can add music or narration to the recorded Cassette.

≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.)

≥Audio Dubbing cannot be performed on a recording made in LP Mode. (-20-)

1 Press the [;] Button (69) on the Remote

Controller where you want to add new

sound.

Copying on an S-VHS (or a VHS) Cassette

(Dubbing)

After connecting the Camcorder and the VCR as illustrated, start the following procedures.

[S-VIDEO IN] [VIDEO IN]

2

[AUDIO IN]

MULTI/

¥REC

A.DUB

 

 

P-IN-P

r

(55)

 

 

 

sVOL

V/REW

PLAY

FF/W

 

W

6

1

5

 

 

 

STILL ADV

PAUSE

STILL ADV

 

(69)

E

;

D

 

INDEX

STOP

INDEX

 

P.B. ZOOM

K

∫

L

 

 

2Press the [A.DUB] Button (55) on the

Remote Controller.

3To start Audio Dubbing, press the [;] Button (69) on the Remote Controller.

To Cancel Audio Dubbing

Press the [;] Button (69) on the Remote Controller.

The Camcorder is in the Still Playback Mode again.

To Play Back the Sound Recorded by 12bit Audio Dubbing

Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >> [12bit AUDIO] >> [ST2] or [MIX].

ST1: It plays back only the original sound.

ST2: It plays back only the sound added by Audio Dubbing.

MIX: It plays back both the original sound and the sound added by Audio Dubbing simultaneously.

To Dub Audio While Listening to a

Pre-recorded Sound

When pausing the audio dubbing, set the

[12bit AUDIO] on the [PLAYBACK] Sub-Menu to [ST2] and you can check the pre-recorded sound. Use headphones to listen to the pre-recorded sound while dubbing the audio.

≥For other notes concerning this item, see -50-.

1

S-VIDEO

OUT

REMOTE/MIC A/V OUT

DV

PHONES

(PLUG IN POWER)

 

1AV Cable

2S-Video Cable

≥Be sure to press the [OSD] Button (-12-) on the Remote Controller prior to copying so that no indications are visible. Otherwise, the displayed tape counter and function indications are also copied.

Camcorder:

1Insert the recorded Cassette. VCR:

2Insert an unrecorded Cassette with an erasure prevention tab.

≥If various setups (such as external input, tape speed, etc.) are required, please refer to the

operating instructions of your VCR.

Camcorder:

3Press the [1] Button (11) to start playback.

VCR:

4Start recording.

5Press the Pause or Stop Button to stop recording.

Camcorder:

6Press the [∫] Button (12) to stop playback.

-37-