Before Use
Quick Guide
1Attach the Battery to the AC Adaptor and charge it.
≥Before use, fully charge the Battery.
≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging starts.
≥When the [CHARGE] Lamp goes off, charging is completed.
2Attach the charged Battery to the Camcorder.
ªInserting a Cassette
1Slide the [OPEN/EJECT] Lever 1 toward the front and pull down to open the Cassette Compartment Cover.
2Insert a Cassette.
1
/ OPEN
EJECT
3Close the Cassette Holder by pressing the [PUSH] mark 2.
4Close the Cassette Compartment Cover.
ªRecording on a Tape
1Set the [OFF/ON] Switch 1 to [ON].
≥The [POWER] Lamp 2 lights up.
ON
1
2 POWER
2Set the Mode Dial to Tape Recording Mode.
3Press the Recording Start/Stop Button.
≥Recording starts.
4Press the Recording Start/Stop Button again to pause the recording.
ªRecording a Still Picture (Photoshot) 1 Set the Mode Dial to Tape Recording Mode.
2Press the [PHOTO SHOT] Button in the Recording Pause Mode.
PHOTO SHOT
2
PUSH